EA-150 PROTECT · No. 605 000

The valve screwing an unscewing unit EA-150 PROTECT is designed to screw and unscrew pressure cylinder valves in cylinders with volumes of up to approx. 80 litres.

TECHNICAL DATA
Constructionsteel construction
Voltage230/400 V, 50 Hz, 16 A
Compressed-air5 bar
Motor with gear3 kW
Weightapprox. 390 kg
Max. torque925 Nm
Dimensions (l x w xh)approx. 1700 x 750 x 3100 mm
Max. heightapprox. 3800 mm
Colourhammer finish painted blue or silvergrey

The unit has torque adjustment (0 – 925 Nm) and torque speed regulation (0 – 30 rpm). The automatic cut-off mechanism is implemented using torque control.

The unit is equipped with a sliding guard door and a perforated grid protective wall at the rear. The unit is equipped with a pneumatic clamping device. The gripping force of this device can be adjusted and is therefore suitable for use with cylinders made from a variety of different materials. The clamping jaws are made of softwood to prevent damage to cylinder paintwork. The height adjustable cylinder seat provides a comfortable working height even for small cylinders and is covered with a rubber plate to prevent damage to cylinder bases. The robust steel girder construction ensures optimum distribution of the forces generated during the screwing in of valves and clamping. The screw-in socket is fully zinc-plated and suitable for use with all valves available on the market.

The unit is easily controlled using a pedal switch.

Optional available at extra charge:

  • Sliding guard door with pneumatic locking mechanism
  • two-hand operating of the clamping device